Heat Treating Suppliers in Pennsylvania
18 vetted U.S. suppliers · 1 state
Pennsylvania has one of the densest heat-treat corridors in the U.S. — vacuum furnaces, induction shops, and case-hardening houses serving the aerospace, oil-and-gas, and tool-and-die work in the region. Below is our live count of vetted PA heat-treat suppliers, with one-click RFQs to multiple at once.
Geographic distribution
Where these suppliers are
Top 1 states by vetted-supplier density.
See the list
Want to see all 18 suppliers?
Run the search and we'll show you who they are. Send branded RFQs to as many as you want in a single email — your search is pre-loaded.
What heat treating covers
Heat treating is the controlled application of heating and cooling cycles to change the mechanical properties of metal parts — hardness, strength, ductility, and dimensional stability. Common processes: through-hardening (austenitize + quench + temper), case-hardening (carburizing, nitriding, induction), stress relief, annealing, normalizing, solution treating and aging, and cryogenic treatment. Most PA heat-treat shops cover a portfolio of these processes; specialty shops focus on one or two.
What to look for in a supplier
Match the process to the alloy: 4140 and 4340 are typically through-hardened in oil; 8620 and 1018 are case-carburized; H13 and D2 are vacuum-hardened to prevent decarb. Confirm the supplier carries the specific certification your work needs — Nadcap for aerospace, AMS 2750 (pyrometry) compliance, ISO 9001 baseline. Ask about furnace size relative to your part envelope — large fixtures, long shafts, and complex tooling all have specific size constraints. For aerospace and medical, traceability and lot control are critical; ask about how they document time-at-temperature and quench severity per lot.
FAQ
Common questions
What's the difference between vacuum heat treating and atmosphere?
Vacuum heat treating runs under vacuum (no oxygen, no decarb, no scale) — used for tool steels, high-alloy stainless, and parts where surface quality matters. Atmosphere furnaces use protective gas (endothermic, exothermic, or hydrogen) and are cheaper, used for high-volume commercial work. Vacuum is more expensive but gives a brighter, more dimensionally stable finish.
What's AMS 2750?
The aerospace specification for pyrometry — thermocouple types, calibration intervals, temperature uniformity testing, and instrumentation requirements. Aerospace heat-treat shops must comply with AMS 2750 to be qualified for AS9100 / Nadcap work. Most general commercial shops don't carry this level of pyrometry documentation.
What's the typical turnaround on heat treating?
Standard commercial work (4140 quench-and-temper, 8620 case carburize, stress relief) runs 1-2 weeks at most shops. Vacuum heat treat with full Nadcap traceability runs 2-4 weeks. Rush turnaround is available at most shops at 50-100% premium.
How are heat-treated parts inspected?
Standard inspection: Rockwell hardness (typically tested at 3+ points per part), case depth (for case-hardened parts), and dimensional check for distortion. Aerospace work adds micro-hardness traverse, microstructure review, and full pyrometry records per lot. Specify the inspection level on the RFQ.
Ready to see the suppliers?
18 vetted U.S. suppliers waiting in your search.