Press Brake Forming Suppliers in Texas
4 vetted U.S. suppliers · 1 state
Texas press-brake capacity supports the oilfield, aerospace, and general-fab markets across the state — CNC press brakes for enclosure, bracket, and weldment-component fabrication. Below is our live count of vetted TX press-brake suppliers, with one-click RFQs to multiple at once.
Geographic distribution
Where these suppliers are
Top 1 states by vetted-supplier density.
See the list
Want to see all 4 suppliers?
Run the search and we'll show you who they are. Send branded RFQs to as many as you want in a single email — your search is pre-loaded.
What press brake forming covers
Press brake forming uses a hydraulic or electric press to bend sheet metal between a punch (top) and die (bottom) — the standard process for converting flat parts into 3D sheet-metal assemblies (enclosures, brackets, panels, ducts, channels). Modern CNC press brakes have automatic crowning, real-time angle measurement, and tool-changer support for complex multi-bend work. Common materials: cold-rolled steel, stainless, aluminum, copper.
What to look for in a supplier
Match the brake to the work: tonnage and bed length determine maximum part size and material gauge. Light-duty brakes (50-100 tons) handle most sheet under 0.125"; heavy-duty (300+ tons) handle structural plate up to 0.5" thick. Bed length is the other constraint — 10' beds are standard, 14-20' beds for long enclosure work. CNC vs. manual: most Texas shops are CNC-equipped, but ask about real-time angle measurement (laser, optical) for tight-tolerance work. Tooling library matters too — common forming dies are universal, but specialty tools (gooseneck punches, rotary benders, hemming tools) are shop-specific.
FAQ
Common questions
What tolerance can press brake forming hold?
Standard commercial: ±1° on bend angle, ±0.020" on flange dimension. CNC brakes with real-time angle measurement hold ±0.5° and ±0.010". Tight-tolerance work (±0.005" flange) requires precision tooling and is achievable but rare — usually handled with form-tools or hard-tooled stamping instead.
What thickness can a press brake bend?
Depends on tonnage and bed length. Light-duty 100-ton machines handle up to ~0.125" mild steel in a 10' bed; heavy-duty 500-ton machines handle 0.5" mild steel. Stainless requires roughly 1.5× the tonnage of mild steel; aluminum requires about 0.5×.
What's the minimum flange length for press brake bending?
Rule of thumb: minimum flange = 4× material thickness + bend radius. For 0.125" steel with a 0.125" radius, minimum flange is about 0.625". Below this, the metal slips off the V-die during forming. Specialty tooling (hemming dies, rotary benders) can go shorter at premium.
What's the typical lead time for press brake work?
Prototypes and small lots from a job shop: 1-2 weeks. Production runs depend on programming, tooling, and shop loading — 2-6 weeks typical. Tight-tolerance or specialty-tooling work can run longer.
Ready to see the suppliers?
4 vetted U.S. suppliers waiting in your search.